Cicio Performance X-Pipe Twin Turbo Kit for Corvette C8 By ETS

Available exclusively at Cicio Performance!!

Turbocharger setup

We use the PT64 on all of the TT C8 builds that come out of Cicio Performance. This setup is perfect for the customer looking to build the ultimate street car with quick spool and transient response.  This kit is capable of right around 700hp on the stock clutches and stock engine and over 1100whp with upgraded clutches, built engine and a fuel system.

Intercooled vs non-intercooled – We have (2) options available depending on your horsepower goals.

The first option is our non-intercooled option.  This option is great for customers not wanting to stress their engine and make a bit more power than stock.  We recommend this option for around 600hp and right around 5-6 psi of boost.  The water to air intercooler option can always be added later on if you decide you want to make over 600hp or run more than 5-6 psi.

The second option is our water to air intercooler with side heat exchanger.  This option is designed to support over 1500whp!  This intercooler features (2) water pumps, an ice box, and (2) HUGE 1000whp+ W2A cores.  The side heat exchanger is located in the driver side fender opening and includes a shroud that’s compatible with the high output factory fan.  The integrated ice box is ideal for any 1/4 mile or 1/2 mile racer providing intake air temps below ambient temperature in most cases.

Oil Scavenge Pump – This is the first pump in this field to offer external motor brushes for easy/inexpensive replacement. The custom heatsink allows the entire motor/pump head assembly infinite rotation allowing optimal orientation of the in/out ports, including port functional reversal. This pump was designed from the ground up to handle the most extreme conditions found in any motor vehicle, with a special emphasis on turbocharger oil scavenging applications.  Built on extremely rugged spur gear technology, this small-frame 350F continuously rated pump offers aerospace/military-grade quality in a compact/lightweight package.

Wastegates in line with the flow with the very high flow rates of the new billet wheel turbo’s, we have found the wastegate system must be very efficient, or else boost creep could be induced. As well as keeping run away boost under control, a very efficient wastegate system will allow tuners to start a tune at a much lower boost pressure, ensuring that the whole tuning process is done safely.

Critical Lines Away from heat – All of the Oil/Water lines are routed away from heat, down and around the turbos, instead of over and across the turbos. This will ensure a lifetime service life for these lines, while also lowering the temperatures of the fluids within the lines.

Fully ported at every transition – From the 3-bolt flange to the exhaust flanges and even the PCV barbs in between, we pride ourselves on the best craftsmanship and attention to detail in the industry. This means that all flanges are surfaced, all transitions ported, and all pieces are clean. These details may not make any major power differences, but it can be the difference in numbers such as 998 vs 1002whp.

Warranty – (3) Year warranty on all fabricated parts.  Manufacturer warranty on turbochargers, wastegates, etc.

Kit Includes

• Choice of turbochargers.
  • PT6466 – 1100whp+
• Choice of intercooler options
  • Hot Piped – Low Boost Applications
    
    • (2) Blow Off Valves
    • Clamps
    • Mounting Hardware
  • Water To Air Intercooler w/ Side Heat Exchanger – Mid to High Boost Applications
    
    • (2) Blow Off Valves
    • (2) Water Pumps
    • (1) Side Heat Exchanger w/ Fan Shroud
    • Feed and Return Water Lines
    • Clamps
    • Couplers
    • Mounting Hardware.
• Turbocharger Hot Parts
  
  • (2) Header To Turbocharger Pipes
  • (2) Dual 3.5″ Exhaust System w/ 4.0″ Exhaust Tips
  • (2) External Wastegate Dump Tubes
  • (2) 44mm Wastegates
  • Exhaust Gaskets
  • Clamps
  • Mounting Hardware
• Turbocharger Intake Kit
  • (2) K&N Filters
  • PCV Breather Kit
  • Clamps

• Turbocharger Oil Feed and Return Kit
  
  • (2) Oil Feed Fittings
  • (2) Oil Feed Lines
  • (2) Oil Drain Tubes
  • (1) Oil Feed Valve
  • (1) Oil Return Scavenge Pump
  • (1) Oil Return Pump Wiring Harness
  • (1) Oil Return Breather Filter
  • Gaskets
  • Clamps
  • Mounting Hardware

**Notes:

**All Custom Orders are refundable within 30 days of purchase but are subject to a 25% restocking fee. After 30 days custom orders are no longer refundable. If you have any questions on this please reach out to us before ordering

**Due to current world events causing global shortages on materials and production that this product may be susceptible to longer than standard lead times. We do however realize that some people order a product because they need it immediately so if this is the case please contact us at 679-297-7770  or [email protected] before ordering so we can get you the most accurate lead time possible.

**Professional Installation is Required.

Our goal is to always under promise and over deliver, our customer service at the very top of the priority list.  Please feel free to contact us with any questions whatsoever!  

Thank you for the opportunity to earn your business, we hope to be able to serve! 

Thank you.

Cicio Performance